Order code builder

HP-4 Recessed — direct downlight order code builder

Assemble a valid Finelite HP-4 Recessed — direct downlight catalog number from its real ordering tree. Choose each option — including made-to-order values like lengths, radii, and driver systems — and the builder composes the full order code, for example HP4-R-D-8-S-830-F-120-SC-FC-10%, keeping only the combinations Finelite actually builds. Copy the code, share the exact build by link, or print a configuration sheet, then confirm against the datasheet before ordering.

HP-4 Recessed Finelite Full specs →

Ordering tree

Every field of the HP-4 Recessed — direct downlight catalog number and its published option codes. The builder above enforces the manufacturer's real availability rules — some options are offered only with specific upstream selections, and made-to-order values (lengths, radii, quantities) are entered within the published bounds. Confirm the exact codes against the current datasheet revision before specifying.

Luminaire type

This builder covers the recessed direct downlight. Recessed Regressed (R RG) and Wall Wash Direct (WW-D) options are consult-factory — see the datasheet.

R: Recessed

Distribution

D: Direct

Total length of run

Nominal run length in feet, 2 ft minimum, 12 ft maximum section. Increments to 1/16" (±1/32") are available — specify the exact length with the factory.

⟨feet⟩: Length feet 2–12 ft

Downlight output

Delivered lumens per foot (flush lens). Standard 381, Boosted 479, High 725, Very High 932. Tailored specifies a value between Standard and Very High.

S: Standard — 381 lm/ft
B: Boosted — 479 lm/ft
H: High — 725 lm/ft
V: Very High — 932 lm/ft
TL⟨output⟩: Tailored output 381–932 lm/ft

Specify lm/ft between Standard (381) and Very High (932).

CRI / colour temperature

830: 80 CRI, 3000 K
835: 80 CRI, 3500 K
840: 80 CRI, 4000 K
930: 90 CRI, 3000 K
935: 90 CRI, 3500 K
940: 90 CRI, 4000 K
8TW: 80 CRI, tunable white
9TW: 90 CRI, tunable white

Downlight optic

Flush is standard. Wall-wash reflectors (FO, K, SSA), regressed diffusers/louvers (RG-*) and reflector-finish options are consult-factory in this builder.

F: Flush (standard)
DL: 1" drop-down lens
DSO: Downlight spread optic
DAO-L: Downlight asymmetric optic — left
DAO-R: Downlight asymmetric optic — right

Voltage

120: 120 V
277: 277 V
347: 347 V

EldoLED OTi drivers only.

Circuiting

SC: Single circuit

Driver selection

Tunable-white drivers require an 8TW/9TW colour selection; 347 V requires an EldoLED OTi driver.

FC-10%: Factory choice 0–10 V 10% (standard)
FC-1%: Factory choice 0–10 V 1%
OTi-10%: EldoLED OTi 0–10 V 10%
OTi-1%: EldoLED OTi 0–10 V 1%
ELD-10V-0%: EldoLED SOLOdrive 0–10 V 0.1%
10V-TW-10%: EldoLED OTi 0–10 V 10% tunable white
FC-DALI-1%: Factory choice DALI 1%
ODXL-DALI-1%: EldoLED Dexal DALI 1%
ELD-DALI-0%: EldoLED SOLOdrive DALI 0.1%
ELD-DALI-1%: EldoLED ECOdrive DALI 1%
ELD-DALI-TW: EldoLED DUALdrive DALI 0.1% tunable white
ELD-DMX: EldoLED POWERdrive DMX 0.1% (8-bit)
ELD-DMX-16: EldoLED POWERdrive DMX 0.1% (16-bit)
ELD-DMX-TW: EldoLED POWERdrive DMX 0.1% tunable white (8-bit)
ELD-DMX-TW16: EldoLED POWERdrive DMX 0.1% tunable white (16-bit)
LUT-ES1: Lutron EcoSystem 1%
LUT-TW: Lutron LD2 DALI-2 1% tunable white

Catalog number	HP4-R-D-8-S-830-F-120-SC-FC-10%
Quantity	1
Luminaire type	Recessed
Distribution	Direct
Total length of run	Length — feet 8 ft
Downlight output	Standard — 381 lm/ft
CRI / colour temperature	80 CRI, 3000 K
Downlight optic	Flush (standard)
Voltage	120 V
Circuiting	Single circuit
Driver selection	Factory choice 0–10 V 10% (standard)