Technical specifications
Technical specifications for Akeso | Wattage | 15–113 W |
| Luminous flux | 2000–13000 lm |
| Efficacy | 115 lm/W |
| Color temperature (CCT) | 3000K / 3500K / 4000K / 5000K |
| CRI | ≥90 |
| Mounting | Recessed (9/16" / 15/16" flat tee), Recessed (9/16" slot tee), Drywall frame kit |
| Dimensions | 8" wide x 4' long (203 x 1219 mm) overbed luminaire; Peak symmetrical peaked lens, Pitch pitched asymmetrical lens; master-satellite tandem or single fixture |
| Distribution | Direct |
| Finishes | Matte Satin White Antimicrobial |
| Dimming | 0-10V standard; 0-10V 1% (L11) / 10% (LD1), Lutron Hi-Lume EcoSystem 1% (LH1), DALI 1% (D11), step dimming (SD5); optional Low Voltage Controller (LVC on/off, LVC1 1%, LVCP step) for bedside pillow-speaker control; 120/277V UNV or 347V |
| Rated environments | Dry, Damp location |
| Rated lifetime | 61,000 h |
| Warranty | 5 years |
Specifications sourced from the
manufacturer's datasheet
. Verify against the current revision before specifying.
About this product
Akeso is Focal Point's integrated LED healthcare luminaire for overbed illumination, offered in two gasketed, impact-modified acrylic lens styles that install as tandem overbed fixtures or single units in grid and drywall ceilings. Peak (FMA8L) uses a symmetrical peaked lens for ambient-only illumination and delivers 2000, 2500, 3000, 3500, 4000, or 4500 lumens per fixture at 15-42 tested system watts (up to 135 LPW at 80+ CRI). Pitch (FMA8LE) uses a pitched, asymmetrical lens combining an ambient function with a dedicated exam function focused on the center of the bed; sold in pairs, a Pitch pair delivers 2800, 4300, or 5700 lumens ambient-only and 10300 to 13000 total lumens with the exam function engaged (an added focusing optic is used on the exam LEDs at the 11000/12000/13000-lumen outputs). Both are 8" wide by 4' long for straightforward installation, use a master-satellite configuration with quick electrical connection, and provide below-ceiling access to LED boards and drivers. The proprietary linear LED module is available at 3000K, 3500K, 4000K, and 5000K in both 80+ and 90+ CRI, held to a 3-step SDCM; 3500K and 4000K at CRI>90 achieve a cyanosis observation index (COI) of 3.3 or less. A 0-10V dimming driver is standard, with 0-10V 1% (L11) / 10% (LD1), Lutron Hi-Lume EcoSystem 1% (LH1), DALI 1% (D11), and step dimming (SD5) options, plus an optional Low Voltage Controller (LVC/LVC1/LVCP) that enables on/off, 1%, or step dimming from a bedside pillow speaker, side-rail device, or momentary switch; input is 120/277V UNV or 347V. Construction is 20-gauge steel with a one-piece 18-gauge matte-white aluminum reflector, the lens end sealed by a silicone gasket, and a Peak IP65 option (dust-tight, protected against water jets per IEC 60529). Mounting covers 9/16" and 15/16" flat tee, 9/16" slot tee, and drywall frame kit, with Chicago Plenum, emergency circuit, emergency battery (10 W for 90 minutes), and NSF-listing factory options. Finished in matte satin white antimicrobial polyester powder coat, Akeso is UL and cUL listed and NSF2 listed for corrosion resistance and cleanability, reports L70 greater than 61,000 hours, and carries a five-year limited warranty.