Skip to main content
LightKilo
Seem Sweep 2 — Linear by Focal Point

Focal Point · Linear

Seem Sweep 2

Narrow 2.5" aperture curvilinear suspended and surface-mount direct linear LED that bends into arcs, corners, and L / U / rectangular / S / Z patterns — 250 to 1000 delivered lumens per foot, 80/90 CRI, up to 136 LPW.

  • UL / cUL (dry / damp, indoor)
Efficacy
CRI
≥80
IP rating
Warranty
5 yr

Technical specifications

Technical specifications for Seem Sweep 2
Luminous flux 250–1000 lm/ft
Color temperature (CCT) 2700K / 3000K / 3500K / 4000K
CRI ≥80
Mounting Suspended (24" / 48" / 96" cable), Surface mount
Dimensions 2.5" nominal aperture; 2.64" housing height; arcs, corners, and L / U / rectangular / S / Z patterns from standard 30-90 degree angles and 12"-168" radii, assembled in 1" increments up to 8' continuous sections
Distribution Direct
Finishes Matte White, Matte Black, Palladium Silver
Dimming 0-10V 10% (LD1) or 1% (L11) standard on 120/277V UNV; 347V, Lutron Athena wireless (LAW1/LAWS), DALI 1% (D11), and low-voltage PoE-compatible options
Rated environments Dry, Damp location
Rated lifetime 72,000 h
Warranty 5 years

Specifications sourced from the manufacturer's datasheet . Verify against the current revision before specifying.

About this product

Seem Sweep 2 is Focal Point's curvilinear architectural linear LED, built around a narrow 2.5" aperture (2.64" housing height) that bends into flowing arcs, rounded corners, and geometric shapes. Specify standard radii from 12" to 168" and angles of 30, 45, 60, or 90 degrees to assemble straight runs, arcs, and L, U, rectangular, S, and Z patterns (lengths in 1" increments, up to 8' continuous sections) with flat or rounded cast-aluminum end caps. A frosted satin extruded acrylic lens over high-white 18-gauge steel reflectors delivers uninterrupted direct illumination without pixels or shadows. Delivered output spans 250 to 1000 lumens per foot (250, 375, 500, 625, 750, 875, and 1000 LPF steps), reaching up to 136.5 LPW. The proprietary linear LED module is offered at 2700K, 3000K, 3500K, and 4000K in both 80+ and 90+ CRI held to 3 SDCM, with the 3500K and 4000K 90+ CRI options carrying a cyanosis observation index of 3.3 or less. The standard 120/277V UNV constant-current driver includes 0-10V analog dimming (10% or 1%), with 347V, Lutron Athena wireless, DALI 1%, and low-voltage PoE-compatible control options; emergency circuit and emergency battery factory options are available on linear housings. Mounted via 24", 48", or 96" cable suspension or surface mount, and finished in matte white, matte black, or palladium silver polyester powder coat, Seem Sweep 2 is UL and cUL listed for indoor dry or damp locations, reports L70 at greater than 72,000 hours, and carries a five-year limited warranty.

Configure a submittal spec

Pick from Seem Sweep 2's published options to compose a copyable, submittal-ready specification. All choices come from the manufacturer datasheet — confirm the final build against the current revision before ordering.

Color temperature
Distribution
Mounting
Finish

Submittal summary

Related products

Insight Lighting · Linear

Adobe

Power
19–81 W
Output
2328–9500 lm
CCT
2700K / 3000K / 3500K / 4000K
Efficacy
117 lm/W

Architectural linear suspended direct/indirect luminaire with an elegant curved profile, in 6 lengths from 33.5" to 92.25" delivering 2,328–9,500 total lumens at up to 128 LM/W.

Insight Lighting · Linear

Adobe Mini (ADBM)

Power
19–81 W
Output
3598–4314 lm
CCT
2700K / 3000K / 3500K / 4000K
Efficacy
53 lm/W

Suspended direct / direct-indirect linear on a 0.125" precision-bent-aluminum tubular profile in six lengths (34"–92") — 82 CRI (optional 90) white light, 19–81 W delivering up to 4,314 delivered lumens.

Axis Lighting · Linear

Air

Power
Output
500–1000 lm/ft
CCT
2700K / 3000K / 3500K / 4000K
CRI
≥90

Ultra-slim semi-direct architectural linear family — up to 1000 lm/ft at 125 lm/W, 80/90 CRI, tunable-white and BIOS options, in 2–12 ft sections and continuous system runs.